CX纯电动轿车驱动系统设计(含CAD零件图装配图)
CX纯电动轿车驱动系统设计(含CAD零件图装配图)(任务书,开题报告,外文翻译,文献摘要,论文说明书11000字,CAD图6张,PDF图6张)
摘要
随着城市现代化的发展,交通日渐发达,人们对汽车的需求也日渐增长,汽车制造行业近些年在中国得到了蓬勃的发展。从2009年开始,中国汽车市场便跃居为全球第一的汽车市场。汽车生产产业已成为我国的经济重要的支柱产业。虽然我国汽车产业巨大,但是自主研发能力和自主品牌汽车与汽车工业发达国家有很大差距,这也与我国传统汽车发展起步较晚有关系。目前,发展新型纯电动汽车是世界汽车发展的大趋势。我国汽车工业发展必须紧跟世界潮流,把握这个机会,缩小与世界汽车发达国家的差距,提升自主研发能力和自主品牌的影响力。纯电动汽车具有结构简单,环保,低能耗,高能量利用的特点,十分符合人们对未来汽车的发展要求。
本文详细介绍纯电动汽车驱动系统的相关结构,包括电机、电池组的选型要求。根据设计车辆的动力性和经济性要求,合理的选择电机、电池组等一系列部件。最后,利用advisor软件建模,对设计好的车辆进行仿真,检验是否能满足设计要求。
关键词:纯电动汽车、驱动系统、电机、电池组、advisor
Abstract [资料来源:www.doc163.com]
With the development of modern cities, traffic increasingly developed, the demand for cars is also growing automotive industry in Chinese in recent years has been vigorous development. Beginning in 2009, Chinese auto market was ranked first in the world car market. Automobile production industry has become an important economic pillar industries. Although China's auto industry is huge, but the R & D capabilities and self-brand cars and the automotive industry in developed countries have a big gap, which also has a relationship with the late Chinese Traditional vehicle development started. At present, the development of new electric vehicles is the general trend of the world automobile development. China's automobile industry development must closely follow the world trend and seize this opportunity to narrow the gap with the developed countries of the world automotive, enhance R & D capability and its own brand of influence. Pure electric car has a simple structure, environmental protection, low energy consumption, high energy use characteristics very consistent about the future development of the automotive requirements. [资料来源:https://www.doc163.com]
This paper describes the correlation structure of pure electric vehicle drive system, including the selection requirements motor, battery pack. The power and economic requirements of the design of the vehicle, a reasonable choice of motor, battery pack and a series of components. Finally, the advisor modeling software, designed for vehicle simulation, testing whether it can meet the design requirements.
Key Words:EV,power system,motor,battery pack,advisor
[来源:http://www.doc163.com]
目录
第1章绪论 1
1.1目的及意义 1
1.2电动汽车国内外研究状况 1
1.3论文研究的主要内容 2
1.4本章小结 2
第二章纯电动汽车的基本结构和组成 3
2.1纯电动汽车的特点 3
2.2纯电动汽车驱动系统的基本结构分析 3
2.3纯电动汽车动力系统的重要部件 5
2.3.1电机 5
2.3.2能量存储系统 6
2.4本章小结 7
第3章纯电动汽车动力系统设计及匹配 8
3.1确定纯电动汽车的几何参数以及各项指标 8
3.2减速器设计 10
3.2.1减速器的减速比的设计 10 [来源:http://www.doc163.com]
3.2.2减速器齿轮设计 12
3.3驱动系统电机的设计 13
3.3.1驱动电机功率设计 14
3.3.2驱动电机转矩和转速的设计 15
3.4动力电池的设计 16
3.4.1动力电池容量的设计 16
3.4.2动力电池数量的设计 17
3.4.3动力电池的最终定型 17
3.5本章小结 18
第4章基于ADVISOR的整车建模和仿真 19
4.1 ADVISOR简介 19
4.2车辆模型的构建[ 19
4.3对设计车辆模型进行仿真 21
4.4本章小结 26
第5章总结与展望 27
5.1全文总结 27
5.2全文展望 27
参考文献 28
致谢 30
下一篇:东风本田CR-V电动SUV后悬架设计(含CAD零件装配图,CATIA三维图)