Honda本田XRV车变速器设计(含CAD零件图装配图)

Honda本田XRV车变速器设计(含CAD零件图装配图)(任务书,开题报告,外文翻译,文献摘要,论文说明书10000字,CAD图7张)
摘要
我国的汽车工业发展的非常迅猛，消费者对于汽车的购买欲望和要求不断增加。自从汽车诞生，就汽车的发展看，变速器的发展是其中非常重要的一部分。变速器、发动机和悬架是汽车中传统的三大件。变速器的好坏也是厂商和消费者评价一台汽车性能好坏的重要指标。在汽车的行驶过程中如果变速器质量不好的话，很容易出现顿挫和异响等问题，这会给消费者带来很大的困扰。同时这也降低了车辆的行驶品质。
变速器对于汽车的传动系统异常重要。一辆汽车的油耗怎么样、动力强不强、操纵性好不好都和变速器的性能息息相关。世界在不断进步，汽车设计水平也在不断地提高,变速器的设计趋势为以较小的尺寸和质量传递尽可能大转矩的扭矩,并使传动的过程尽可能的平顺高效本文阐述了一款用于小型suv的手动变速器的设计过程，第二张是关于变速器的整体结构，第三章主要涉及变速器主要参数的选择，第四章主要内容是齿轮的设计和校核，轴的设计与计算在第五章，并完成图纸的绘制。
关键词：变速器；齿轮；轴；轴承；设计；

Abstract
China's auto industry is developing very rapidly, consumers desire for the purchase of cars and increasing demands. Since the birth of the car, the development of the car, the development of transmission is one of the very important part. The transmission, the engine and the suspension are the traditional three pieces of the car. Transmission is also an important indicator of the performance of manufacturers and consumers evaluation of a car performance is good or bad.In the car driving process if the transmission quality is not good, it is prone to setbacks and abnormal sound problems, it will bring great distress to the consumer. At the same time, it also reduces the quality of the vehicle. [资料来源：http://doc163.com]
The transmission is very important for the transmission system of the car. How a car fuel consumption, power is not strong, good handling and transmission performance are closely related. The world is constantly improving, and the design level of the car is constantly improving. The design trend of the transmission is to transmit as much torque as possible with a small size and mass, and make the transmission process as smooth and efficient as possible. This paper describes a small suv manual transmission design process, the second is on the overall structure of the transmission, the third chapter mainly involves the choice of the main parameters of the transmission, the fourth chapter is the main content of the gear design and verification, The design and calculation of the shaft is done in Chapter five and drawing the drawings
Key Words: transmission;gear; shaft; bearing; design;
 

目    录
第1章绪论    1
1.1概述    1
1.2变速器的发展现状    1
1.3研究的目的和依据    2
第2章变速器结构方案的确定    3
2.1变速器的总体结构方案    3

2.2倒挡布置方案    3
2.3零部件结构方案分析    4
2.3.1齿轮形式    4
2.3.2换挡机构形式    4
2.3.3防脱挡措施    4
2.3.4轴承形式    5
第3章变速器主要参数的选择    7
3.1设计初始数据    7
3.2变速器总体尺寸和参数的确定    7
3.2.1各挡传动比的计算    7
3.2.2中心距A的确定    8
3.2.3变速器的外形尺寸    9
第4章变速器齿轮零件的设计计算    10
4.1齿轮参数的确定    10
4.1.1模数    10
4.1.2压力角    10
4.1.3齿轮螺旋角    10
4.1.4齿宽    11
4.2确定各挡齿轮的具体参数    11
4.2.1确定一挡齿轮的参数    11
4.2.2确定其他各挡齿轮的齿数    11
4.2.3确定倒挡齿轮的齿数    15

[资料来源：http://doc163.com]

4.3齿轮材料的选择和校核    15
4.3.1齿轮材料的选择    15
4.3.2计算各轴的转矩    16
4.3.3许用应力计算    17
4.3.4齿轮应力校核    17
第5章变速器轴、轴承等零件的设计计算    22
5.1轴的选择与计算    22
5.1.1材料和尺寸的选择    22
5.1.2轴的强度校核    22
5.2轴承的选择与计算    24
5.2.1输入轴轴承的选择和计算    24
5.2.2输出轴轴承的选择和计算    25
第6章同步器和换挡机构的的设计    27
6.1同步器的设计    27
6.1.1同步器的选择    27
6.1.2同步器主要参数的确定    27
6.2换挡机构的设计    28
6.2.1换挡位置图    28
6.2.2互锁装置    28
6.2.3自锁装置    30
6.2.4倒挡锁    30
参考文献……………………………………………………………………………………32 [资料来源：Doc163.com]
附录…………………………………………………………………………………………33
致谢…………………………………………………………………………………………35 [资料来源：http://Doc163.com]