3MW风电机组塔架建模及装配设计(含CAD零件图装配图,PROE三维图)
3MW风电机组塔架建模及装配设计(含CAD零件图装配图,PROE三维图)(任务书,开题报告,外文翻译,论文说明书8000字,CAD图7张,PROE三维图,答辩PPT)
摘要
随着风力发电在我国的大力发展,风力发电机组的设计和开发取得了非常丰硕的成果。目前我国已基本上掌握了兆瓦级以下的风力发电技术,兆瓦级以上等大型风力发电机组还处于研发阶段。随着风力机组的大型化,其关键零部件的设计要求越来越高。塔架是风力发电机组的重要支撑部件,其结构的静动态特性、疲劳损伤以及其螺栓法兰连接强度对风力发电机组的工作寿命影响很大。为了保证风力发电机组安全、平稳和可靠的运行,设计出结构合理和性能稳定的塔架意义重大。
本论文是配合风机塔架设计的同学用proe进行建模并绘制相关的cad图纸。论文主要工作有：
（1）、上段、中段和下段塔架的各段塔筒建模。
（2）、上段、中段和下段塔架的法兰建模。
（3）、连接塔架用紧固件建模。
（4）、绘制建模总装配图。
关键词：风力发电机、风机塔架、塔筒、建模、Pro-E
Abstract
With the development of wind power in our country, the design and development of wind turbines have made great achievement. At present, China has basically mastered the megawatt level wind power generation technology, but large-scale wind turbine which is above the MW level is still in development stage. With the development of large-scale wind turbine, the designs of the key parts require higher demand. The tower is an important support part of the wind turbine, so the static and dynamic characteristics, the fatigue damage of the structure and the bolted flanged connection strength of the wind turbine have a great impact on the working life of wind turbine. In order to guarantee the operation of wind turbine smoothly reliably and safely,design a rational structure and stable performance of the tower is great significance.
This paper which is using pro/e modeling and CAD drawing is combined with the wind turbine tower design of other student.
The main works in this paper are:
(1) the modeling of the upper, middle and lower segment of the tower.
(2) the modeling of the tower flange.
(3) the modeling of fasteners used to Connect the tower.
(4)getting together the model.
key word: Wind generator, wind turbine tower, tower, modeling,pro/e
[资料来源：www.doc163.com]
[资料来源：http://Doc163.com]
目录
摘要 I
Abstract II
第1章 绪论 1
1.1风机的研究背景及意义 1
1.2 pro/e及cad简介 2
第2章 3MW风电机组塔架建模 4
2.1 塔架建模目的 4
2.2 风机塔架建模总表 5
2.3下端塔架各筒体建模 6
2.3.1六段塔筒建模 6
2.3.2下段塔架法兰建模 11
2.3.3下段塔架门框建模 15
2.4中段塔架各筒体建模 19
2.4.1十三段筒体建模 19
2.4.2中段塔架法兰建模 22
2.5上段塔架各塔筒建模 23
2.5.1十四段筒体建模 23
2.5.2上段塔架法兰建模 23
2.6连接紧固件建模 24
2.6.1螺栓建模 24
2.6.2螺母建模 27
2.6.3垫片建模 28
本章小结 30
第3章 3MW风电机组塔架装配 31
3.1.上段塔架装配 31
3.2.上段中段塔架连接法兰及紧固件装配 33
3.3 中段塔架装配 38
3.4 中段和下段塔架连接法兰及紧固件装配 38
3.5 下段塔架装配 39
3.6 总装配图 40
本章小结 41
结语 42
致谢 43
参 考 文 献 44
[资料来源：www.doc163.com]