Open Nav

无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版)

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.仅供学习参考之用.
   帮助中心
资料介绍:

无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版)(任务书,开题报告,文献摘要,论文说明书英文版10000字,CAD图纸8张,STP三维装配图)
Abstract
Self-driving Minibus have become an emerging trend in the world. Based on the characteristics of a fixed commuting route of the bus, the use of driverless technology can greatly improve the operating efficiency and save operating costs. Unmanned driving can also provide passengers with greater and more comfortable seating space.Its special driving characteristics determine that its interior is different from regular buses. This paper analyzes the structural form and functional facilities of unmanned buses, comprehensively considers the requirements of dynamics, economy, comfort, ergonomics, etc., reasonably determines the main interior layout of the bus, and designs seats through ergonomics. The process of designing the general layout of the car body is described in detail. It also strictly checked the interior safety according to fire safety, and refined the interior parts according to the user experience.

[资料来源:http://Doc163.com]


Keywords: Self-driving Minibus, Interior design, Fire control.

2.2 Size determination
First of all, considering the use of driverless microbuses and the complexities of operating road conditions, the current domestic road conditions are relatively complex. However, the scenic spots and airport road conditions are much better. Therefore, it is decided that the volume of unmanned buses should not be too large; otherwise, they will Flexibility has a big impact. Colleagues also provide passengers with comfortable seating space. After comparing several models, the size of the driverless minibus model was determined as shown in Table 2.1.
Table 2.1 Basic parameters of the car body
Body length    4710mm
Body width    2064mm
Body height    2250mm
 

[资料来源:http://Doc163.com]

无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版)
无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版)
无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版)
无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版)
无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版) [来源:http://www.doc163.com]
无人驾驶微型巴士内饰虚拟设计(含CAD图,STP三维装配图)(英文版)


Contents
Chapter 1 Introduction    1
1.1 Background of this Question    2
1.2 Purpose and Significance of the Question    5
1.3 Domestic Research Status    6
1.4 Overseas Research Status    7
1.5 The basic content of the study    7
1.6 Research goals    8
1.7 Proposed technical solutions and measures    8
Chapter 2 Model Reference and Determination    9
2.1 Model determination    9
2.2 Size determination    9
2.3 Preliminary design analysis of the interior    9
2.4 Body Design    10 [版权所有:http://DOC163.com]
Chapter 3 Seat Design    12
3.1  Front and rear seats    12
3.1.1  Ergonomic analysis    12
3.1.3  Seat support    16
3.2 side folding seat    21
Chapter 4 Auxiliary facilities    24
4.1 Handrails    24
4.2 Displays    25
4.3 Get off button    26
Chapter 5 Fire Safety Facilities    28
5.1 emergency door handle    28
5.2 Fire Hammer    29
5.3 fire extinguisher    30
Chapter 6 Air Conditioning    33
6.1 Air Conditioning    33
6.2 Selection of Compressors    35
Chapter 7 Interior Design    38
7.1 Interior Finishes and Flame Retardant Properties    38
7.2 interior color and lighting    40 [资料来源:https://www.doc163.com]
Summary    42
Acknowledgements    43
References    44

[来源:http://Doc163.com]

  • 关于资料
    提供的资料属本站所有,真实可靠,确保下载的内容与网页资料介绍一致.
  • 如何下载
    提供下载链接或发送至您的邮箱,资料可重复发送,若未收到请联系客服.
  • 疑难帮助
    下载后提供一定的帮助,收到资料后若有疑难问题,可联系客服提供帮助.
  • 关于服务
    确保下载的资料和介绍一致,如核实与资料介绍不符,可申请售后.
  • 资料仅供参考和学习交流之用,请勿做其他非法用途,转载必究,如有侵犯您的权利或有损您的利益,请联系本站,经查实我们会立即进行修正! 版权所有,严禁转载
    doc163.com Copyright © 2012-2024 苏ICP备2021029856号-4