Open Nav

多点温度计的系统研究设计

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.仅供学习参考之用.
   帮助中心
资料介绍:

多点温度计的系统研究设计(任务书,开题报告,外文翻译,论文11700字)
摘 要
在现代工业生产活动中,温度作为一种可以实际测量的重要参数,能起到对设备运行状态、生产环境等外界因素进行实时监控的作用,以保证整个生产活动高效开展。然而,要想得到满意而准确的测量结果并不是那么容易,测量仪器及测量方法的选择不当都会影响其测量结果。因此,准确且实用的温度数据测量系统具有举足轻重的作用。
在实际生活中,往往我们要采集的温度不止一个,需要同时测量不同地方的温度,因此多点温度计采集系统就显得尤为重要。本次设计的多点温度计采集系统,以STC89C52单片机作为微控制器,设计出一种8路巡检高低温智能温度报警系统,通过DS18B20温度传感器检测温度,当检测到的温度高于设定值时蜂鸣器报警或当检测到的温度低于设定值时蜂鸣器开始报警,温度检测精确到0.1度。并具有掉电保存功能,数据保存在单片机内部。工作状态实时显示在1602液晶上。其中电源采用3节5号干电池供电。与传统的模拟信号温度计组成的多点测温系统相比电路简单,集成度高,扩展性能好,抗干扰能力强,因此具有很好的经济效益和实用性。
本次设计的多点温度计采集系统,以STC89C52单片机作为微控制器,设计出一种8路巡检高低温智能温度报警系统,通过DS18B20温度传感器检测温度,当检测到的温度高于设定值时蜂鸣器报警或当检测到的温度低于设定值时蜂鸣器开始报警,温度检测精确到0.1度。并具有掉电保存功能,数据保存在单片机内部。

[资料来源:https://www.doc163.com]

关键词:STC89C52单片机  DS18B20  1602液晶模块

Abstract
In the modern industrial activity, Temperature as an actual measurement of important parameters can have on the equipment running status, the role of the production environment and other external factors for real-time monitoring, however, is not so easy, measurement instrument and measurement method of improper selection will affect the measurement result. Therefore, accurate and practical temperature measurement system plays a decisive role.
In real life,more than one often we want to collect temperature,requires the simultaneous measurement of different parts of the temperature,so multiple point thermometer acquisition system is very important.Multi point temperature gathering system in this design, STC89C52 micro controller as the micro controller,designed a 8 inspection of high and low temperature intelligent temperature alarm system,through the DS18B20 temperature sensor to detect temperature,when the detected temperature is higher than the set value when the buzzer alarm or when the detected temperature is lower than the set value when the buzzer alarm,temperature detecting accurate to 0.1 degrees.And has the electricity saving function, the data saved in the internal.The state of real-time display on the LCD in 1602. The power supply adopts 3 section No. 5 dry batteries.Multi point temperature measurement system and compared to traditional analog  has the advantages of simple circuit, high integration, good expansibility,strong anti-interference ability, so it has good economic benefit and practicability.
[来源:http://www.doc163.com]

Multi point temperature gathering system in this design, STC89C52 micro controller as the micro controller, designed a 8 inspection of high and low temperature intelligent temperature alarm system, through the DS18B20 temperature sensor to detect temperature, when the detected temperature is higher than the set value when the buzzer alarm or when the detected temperature is lower than the set value when the buzzer alarm, temperature detecting accurate to 0.1 degrees. And has the electricity saving function, the data saved in the internal mcu.
Key words: STC89C52single-chip microcomputer  DS18B20  1602 The LCD module

研究内容及其关键技术
本文的主要内容是设计一种多点温度计采集的系统。从行业的需求分析项目研发的可行性及必要性,而后着手系统具体设计方案,分别从硬件电路设计及软件编程两个方面展开,对各功能模块进行详细设计,最后对已完成的系统进行简单测试,分析设计过程中取得的成果以及存在的问题。
本文的主要工作是从系统总体方案设计着手,并对各功能系统进行详细展开。采用STC89C52单片机作为控制单元,因为该型单片机价格便宜,功能比较强大,性价比高,而且在市场上很容易买到。通过DS18B20温度传感器来采集温度信息,送入主控单元单片机,处理数据后完成相应动作,以达到自身控制。液晶显示采用1602LCD实时显示工作状态。此系统比较灵活,更重要的是采用软件方法来解决复杂的硬件电路部分,使系统硬件简洁化,各类功能易于实现,能很好地满足题目的要求。下面为文章主要章节和内容安排:

[来源:http://Doc163.com]


第一章:绪论。本章主要介绍本系统研究的背景、内容及意义。
第二章:多点温度采集系统的整体方案设计。本章主要介绍系统总体设计框架以及各系统的设计概述,并介绍本系统各关键器件的选用及功能特点。
第三章:系统软件设计。本章主要介绍在硬件基础上的软件设计方面的工作。主要包括DS18B20的温度读取及转换,显示模块软件设计,报警控制电路软件设计及多路数据巡回显示。
第四章:系统的调试。本章主要展示从市场调研到目前的研究成果,并对所完成的工作进行试验测试,以及对测量结果进行简要分析。
第五章:总结与展望。本章主要是对本文所做的工作进行简单的总结,以及系统中仍
存在的问题和后续工作中需要改善的环节。
 
[资料来源:www.doc163.com]

多点温度计的系统研究设计
多点温度计的系统研究设计
多点温度计的系统研究设计
多点温度计的系统研究设计
多点温度计的系统研究设计

[资料来源:https://www.doc163.com]
目  录
第一章 绪论    1
1.1  引言    1
1.2  研究的背景和意义    1
1.3  温度检测技术的研究现状及发展趋势    2
1.4  研究内容及其关键技术    3
第二章 系统硬件电路设计    4
2.1  主控制模块    4
2.2  STC89C52单片机    5
2.3  温度传感器DS18B20    6
2.3.1 基本介绍    7
2.3.2 控制方法    7
2.3.3 供电方式    8
2.4  电源模块    8
2.5  显示模块    8
2.6  单片机最小运行系统    9
2.6.1 晶振    9
2.6.2 复位电路    10
2.7  蜂鸣器、发光二极管报警电路    10
第三章 系统软件设计    10
3.1  程序结构分析    10
3.2  系统程序流图    11

[资料来源:www.doc163.com]


3.3  DS18B20初始化程序流程图    11
3.4  读温度子程序流程图    12
3.5  显示模块软件设计    13
3.6  报警控制电路软件设计    14
3.7  多路数据巡回显示    15
第四章 系统的调试    16
4.1 温度显示实物的调试    17
4.2 温度设置、菜单操作的步骤    18
第五章  总结与展望    21
参考文献    22
致  谢    23
附录一    24
附录二    24

[资料来源:www.doc163.com]

  • 关于资料
    提供的资料属本站所有,真实可靠,确保下载的内容与网页资料介绍一致.
  • 如何下载
    提供下载链接或发送至您的邮箱,资料可重复发送,若未收到请联系客服.
  • 疑难帮助
    下载后提供一定的帮助,收到资料后若有疑难问题,可联系客服提供帮助.
  • 关于服务
    确保下载的资料和介绍一致,如核实与资料介绍不符,可申请售后.
  • 资料仅供参考和学习交流之用,请勿做其他非法用途,转载必究,如有侵犯您的权利或有损您的利益,请联系本站,经查实我们会立即进行修正! 版权所有,严禁转载
    doc163.com Copyright © 2012-2025 苏ICP备2021029856号-4