Open Nav

使用统计技术优化的试剂用量对铜浮选

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.仅供学习参考之用.
   帮助中心
资料介绍:

使用统计技术优化的试剂用量对铜浮选(中文4000字,英文3000字)
摘要:Z11的影响和AP407捕收剂以及AF65 和AF70起泡剂进行Sungun集中器铜选矿厂粗选流程使用24正交设计。响应函数产生在铜品位和回收和优化的实验范围内。最佳试剂用量被发现是12.01g/t Z11 ,11g/t AP407,3g/t AF65和5 g/t AF70达到最大铜品位(8.17%)。12 g/t Z11的试剂用量,11 g/t AP407,3 g/t AF65 15 g/t AF70产生最大铜回收率(86.44%)。正交表的分布格局分布表明,(32%,32%,32%,32%)可以产生最好的回收(87.75%)相比,其他检查分布模式。
关键词:硫化铜矿石;浮选药剂;建模;优化

 Optimization of reagent dosages for copper flotation using statistical technique
 
Abstract: The effects of Z11 and AP407 collectors as well as AF65 and AF70 frothers were evaluated in the rougher flotation circuit of the Sungun copper concentrator plant using 24 full  factorial design. Response functions were produced for both Cu grade and recovery and optimized within the experimental range. The optimum reagent dosages were found to be 12.01 g/t Z11, 11 g/t AP407, 3g/t AF65 and 5g/t AF70 to attain the maximum Cu grade (8.17%). The reagent dosages of 12g/t Z11, 11g/t AP407, 3g/t AF65 and 15g/t AF70 produced the maximum Cu recovery (86.44%). The collector distribution demonstrated that the distribution pattern of (32%, 32%, 20%, 16%) can produce the best recovery (87.75%) in comparison to other examined distribution patterns. [版权所有:http://DOC163.com]
Key words: copper sulphide ores; flotation reagents; modelling; optimization
                                                           [来源:http://Doc163.com]

  • 关于资料
    提供的资料属本站所有,真实可靠,确保下载的内容与网页资料介绍一致.
  • 如何下载
    提供下载链接或发送至您的邮箱,资料可重复发送,若未收到请联系客服.
  • 疑难帮助
    下载后提供一定的帮助,收到资料后若有疑难问题,可联系客服提供帮助.
  • 关于服务
    确保下载的资料和介绍一致,如核实与资料介绍不符,可申请售后.
  • 资料仅供参考和学习交流之用,请勿做其他非法用途,转载必究,如有侵犯您的权利或有损您的利益,请联系本站,经查实我们会立即进行修正! 版权所有,严禁转载
    doc163.com Copyright © 2012-2024 苏ICP备2021029856号-4